Anti Static Brush

Anti Static Brush Uses

More often than not anti static is utilized to generally mean static dissipative, conductive properties and low charging properties that is why you need one of these brushes.  There are many anti static brushes, but each of these kinds of brushes comes with their very own distinctive uses that they are recommended for, as well as their own distinctive properties.

There are different kinds of static dissipativec brushes.  The anti static brush is use to apply where it is necessary for the reduction of any static charge to point Ov as there is usually an obstacle to the operation and therefore the medium that is being release is not responsive to current flow that is high. One example of this is the brushes you usually find inside copy machines.


How You Should Use The Brushes

Anti Static Brush

There is just a small charge on the paper.  However, its presence is more than capable of making single sheets cling or stick together.  There is a current that is produced created by a discharge of the paper that is rapid as it goes through the conductive fibre.  This conductive fibre is by no way dangerous to the equipment.  Another good case of this is when there is a brushing off of the plastic chips that is usually clinging to the block that they were generated from.  There will no harm done to the equipment in this case either. However, if there is a small charge then this is potentially tricky.

When there is extremely high current flow that would be destructive to the discharge of the product, the static dissipative brushes are what are used in these instances.  What the anti static brush do is to bring in a resistance between the ground and the charged surface that is high.  This serves to reduce the flow out the current in a proportional way.  When you are working with Class 1 electrical components, static dissipative brushes are what should be used.  However, there is a drawback to using static dissipative fibre and it is that it does not lessen the static charge to Ov that is why is much better to use a brush.

For the application where the production of a charge that is <200v when you utilize the brush is not of nay great significance.  In these instances, brushes that are low charging is what is normally used.  However, there is no removal of any existing charges, and as such, the low charging brushes are used for purposes that are not electronic.

What materials are these brushes made out of?

There are different materials that make up these brushes, namely natural fibres such as hog bristle, horse hair, tampico and goat hair. They are also made from synthetic fibres that are inclusive of static dissipative nylon, Thunderon™, Statigo9, and carbon fibre that are usually utilized for cleaning rooms.  Additionally, there are metal fibres which are inclusive of phosphor bronze, brass, stainless steel and aluminium.  Anti static brush are usually utilized as conductive brushes but also as a way to clean rooms.